Pickering Beach Garage Door SpecialistsService bulletin 1 of 3
Garage Door Remote and Keypad Programming: what to note first
Your remote was in the visor when the car was broken into last night.
Ajax, Ontario · Garage Doors · open 24/7

Your remote was in the visor when the car was broken into last night. So was the insurance slip with your address on it. The door still answers that remote, wherever it is now, and you would very much like it not to.
Worth answering before the call
Do you have a keypad outside, and does anyone still know its code? Is any remote missing or stolen, or with someone who should no longer have access? Roughly how old is the opener, and can you read its model label?
How do I program the built-in button in my car?
Often in two steps, on a common HomeLink-style setup. First the car learns a working handheld remote: hold the remote close to the mirror or console and press its button together with the vehicle button until the indicator changes. Then the opener learns the car: press learn on the head unit, walk back to the car within the window that follows, and press the trained button repeatedly until the door responds. Some vehicle systems use a different sequence with no handheld remote, so the vehicle manual is checked first.
Where should the keypad and wall control be mounted?
Out of children's reach and in sight of the door. The door industry's checklist puts wall-mounted push buttons at least about one and a half metres above the floor, in clear view of the door and away from moving parts, and outdoor keypads follow the same idea beside the door. Keypads are programmed before mounting, then fixed with the screws and anchors suited to the wall.